Omnifit Fittings Overview

Products:

• Omnifit small variable bore 'cap-type' connectors for 0.5 to 4mm OD tube

• 1/4''-28 UNF block connectors

• In-line connectors

• Omnifit large variable bore 'cap-type' connectors for 0.5 to 11mm OD tubing

• Barbed adaptors

• Omnifit cap adaptors

• 1/4''-28 UNF adaptors

• 1/4''-28 UNF to small variable bore adaptors for 0.5 to 4mm OD tubing

• Gripper fittings

• Inverted cone fittings

• Flanged fittings

• Omnigrip Fittings

• Cone fittings

• O-ring fittings

• Ready-assembled PTFE tubing and fittings

• Plugs

• Tube connector kits

• Thread to thread couplings

• PTFE tubing

• Ready-assembled PTFE tubing and fittings

• Bev-A-Line XX tubing

• Tube cutting and flanging

Products  : Fittings, Connectors and Adaptors 

 The Omnifit Gripper fitting with PTFE seal is provided in sizes for 1/16" and 1/8" O.D. hard tubing.
The gripper fitting system uses a  fitting made of polypropylene or PEEK with a 1/4"-28 or M6 thread and a PTFE gripper that attaches when twisted on the tubing.

The Omnifit range of connectors is a versatile system for connecting different types of tubing instantly, including stainless steel, PTFE, glass and silicone. Tubing sizes between 1 and 11 mm can be connected using either Viton 'O'-rings or PTFE cones.
Configurations include 2, 3, 4, 6 and 8-way options.
The Omnifit line of adaptors includes connections for luer, pipe, 1/4"-28, glass tubing, stainless steel tubing, barb, and Omnifit 'cap-type' interfaces.   
Fittings:

• 1000 P.S.I. Pressure Rating

• Secure fitting

• Gripper, Inverted Cone, and Flanged types
  Connectors:

• All PTFE body

• Autoclavable

• For use with tube outside diameters of 1 - 11 mm
  
  Adaptors:

• Chemically inert

• Tefzel/PTFE construction

08

NEW Website

Chromalytic Technology - Australian Distributors 'specialising in chromatography'
:  GC, HPLC & Fluid Transfer Products; Instrumentation  Home : Sections

07