SRI LogoGC Troubleshooting Forum

Welcome to our public Gas Chromatography and Data System
troubleshooting forum, where you can post questions about
applications, procedures, and the operation of your GC or
data system.  Our technical support staff will respond to all
chromatography-related postings here, although you are
free to post a reply to any message also.  If you have any
comments, expertise, and observations regarding any
information posted on this message board, please feel
free to add your contribution by posting a reply.

Although we will respond to data system-related
computer questions, please understand that
this is not a PC Troubleshooting Forum,
it is a GC Troubleshooting Forum.

[ Post Message ] [ FAQ ]
  • Re: - Moskal 06:37:28 6/25/103 (0)
  • Real work from home - inna 06:12:12 6/25/103 (0)
  • Earn for clerical job at Home - BADAGALA NADAMUNI 00:15:23 6/25/103 (0)
  • Re: - Albert 15:32:37 6/24/103 (0)
  • Re: - Albert 15:17:53 6/24/103 (0)
  • Amantadin in plasma - Farzad 15:17:49 6/23/103 (0)
  • rising baseline - Jeff Buth 09:29:05 6/23/103 (2)
  • Wide Peaks with HS sampling - Jeff 16:01:01 6/20/103 (0)
  • pressure - ilse 07:09:17 6/17/103 (1)
  • serial port data acquisition board - John Elwin 03:35:25 6/16/103 (1)
  • PID lamp--Voltage regulation - Eric Wall 12:47:37 6/09/103 (1)
  • ABSOLUTELY NO PEAK BY GC - FAYE AGHAEI 22:11:39 6/05/103 (1)
  • Inverse peak and low response on the FID - g.curry 16:33:01 6/05/103 (1)
  • linking to excel spreadsheet - Jon Woodward 03:45:14 5/29/103 (1)
  • Ignition of FID - Amanda 10:27:05 5/27/103 (1)
  • FID OpAmp? - LJM 17:28:49 5/24/103 (1)
  • Purge & Trap Autosampler - Chon, Son-Chu 19:23:00 5/22/103 (1)
  • Technical inquiry - Yongseok Son 08:01:31 5/22/103 (1)
  • Re: no peaks at all - Greg Benedict 14:48:51 5/16/103 (3)
  • problems with acetone and meoh recoveries - d parsa 15:25:32 5/15/103 (1)
  • right shift peaks - Courtney 11:54:48 5/09/103 (0)
  • no peaks, only backgroundnoise - Ilse Strijbos 07:37:52 5/09/103 (4)
  • right shift peaks - Courtney 14:38:00 5/08/103 (1)
  • lost of communication between PC and gc 5890series2 with - yves faniel 11:55:14 5/08/103 (0)
  • Overheating purge and trap device - Marc Van Acker 09:14:20 5/02/103 (1)
  • Heating problem of the Purge and trap device - Marc Van Acker 07:20:27 5/02/103 (5)
  • External pnumatics pannel - Kim Styles 19:37:06 5/01/103 (1)
  • FID low response to 100 ppm hexane-odd appication - Rich 16:06:27 4/29/103 (1)
  • no solvent peak/elevation at end of peak - Xia Ming Za 14:48:24 4/29/103 (1)
  • baseline drift, second try - Thorsten Steinberg 01:51:06 4/28/103 (1)
  • Peaks are not Showing up on screen - Tom McDowell 11:59:51 4/25/103 (2)
  • Technical incury - Yongseok Son 09:34:39 4/25/103 (1)
  • where can I get the manual about operate dual oven GC - xinyu liu 16:33:30 4/21/103 (1)
  • 8610C with PID - YongSeok Son 09:28:30 4/16/103 (1)
  • persistant tailing - Kerstin Tabatt 04:11:15 4/16/103 (2)
  • Analysis of methane - Young-Han Lee 21:36:57 4/14/103 (0)
  • analysis of methane - Young-Han Lee 21:18:53 4/14/103 (1)
  • Incorrect Values from FPD Calibration - Terry Rowles 17:11:34 4/14/103 (2)
  • Persistent peak - Keith Hohn 13:28:41 4/13/103 (3)
  • peak shift - i.sugaya 17:50:49 4/11/103 (1)
  • Please help with FID calibration! Urgent! - Melanie 15:55:43 4/09/103 (1)
  • Gain Switch - Cory Twemlow 11:07:05 4/09/103 (1)
  • FID and FPD Instability - Ken Johnson 10:49:54 4/08/103 (1)
  • Carbosieve Trap with Tenax Gr - Luke Soule 19:43:20 3/31/103 (1)
  • NPD issues - Jason 21:49:11 3/25/103 (1)
  • Tailing with NPD - Jason 20:34:32 3/25/103 (2)
  • PeakSimple Chrom. Data System MODEL 202 - Joe 16:49:46 3/25/103 (1)
  • GCEXPRESS - Brandie Goldman 14:50:22 3/25/103 (0)
  • Water injections HELP!!! - Ed 16:23:07 3/24/103 (4)
  • SRI 8610C with PID - YongSeok Son 18:43:39 3/19/103 (1)
  • Problems with contamonation of sample loop - Keith Ritson 11:59:10 3/19/103 (1)
  • Internal Air Compressor - John Enders 10:57:01 3/19/103 (1)
  • Response Variation During Cryogenic Runs - Brian Starr 09:23:44 3/19/103 (0)
  • baseline drift - Thorsten Steinberg 06:53:56 3/19/103 (2)
  • 8610C with PID - YongSeok Son 08:35:55 3/17/103 (4)