|
Model
210D HPLC System
|
SRI
HPLC
|
|
- Isocratic
or Binary Gradient
- UV or
Conductivity Detectors
- Rheodyne
7725i Injection Valve with remote start
- 1 channel
PeakSimple Data System
- Field
Portable HPLC
|
 |
| Excellent for
educational, quality control, and field applications, the SRI Model
210D is a complete, entry-level HPLC system in an economical package.
Everything you need is inside the compact, rugged chassis. |
|
|

|
| The 210D comes
standard with two detectors and a single channel
A/D board. The signals from the UV and Conductivity detectors
are software switchable; the user can toggle between one detector
and another, even during an analysis. If both detector signals need
to be viewed simultaneously, we recommend upgrading to a four
or six channel data system. An additional
benefit to the upgradethere will be 2 to 4 extra channels available
for external detectors, which can be easily connected to the customer
access terminals on the left side of the 210D. |
 |
|
|
|
The
broadband UV detector monitors multiple wavelengths between 200nm
and 400nm. The 254nm emission line from the mercury lamp is the strongest,
but other, weaker emission lines (312nm and 365nm) may also be absorbed
by the sample as it passes through the cell. In most cases, this is
an advantage because it may allow compounds which do not absorb at
254nm to be detected. In other cases, the additional bandwidth of
the detector may detect interfering peaks. |
| This
chromatogram shows the analysis of a mix of Polycycylic Aromatic Hydrocarbons
by the UV detector in the Model 210D. |
|
| The
Conductivity detector is conveniently integrated into the body of
the low-volume UV cell. The entire detector compartment is thermostatted
to ensure the most stable possible baseline. It is particularly useful
for measuring anions, organic acids, and compounds which do not absorb
in the UV. |
|
|
20uL
of 1ppm chloride was injected into a 210D to obtain this chromatogram.
|
|
| The
Model 210D column heater will accept most HPLC columns up to 25cm
long. The heater is mounted on a vertical slide that conveniently
holds the heater above the compartment for column installation or
replacement. The temperature is adjustable from ambient to 100oC
for a wide range of temperature-sensitive applications. |
|
The
column heater may be raised from the operating position for easy
access.
|
|
|
|
Operating
position
|
Access
position
|
|
|
|
The
solvent recycling valve is a huge convenience that saves time, money,
and disposal costs because it allows the user to recycle the solvent
when no peaks are eluting. The solvent recycling valve can also be
used as a single sample fraction collector. Using a PeakSimple
Event table, the solvent recycling valve can be switched at any
time during the analysis to divert the detector effluent from the
waste bottle to a sample vial when the peak of interest exits the
detector. |
| Use the PeakSimple
Event table to turn the solvent recycle valve ON at any time. |
|
| The
handy storage compartment built into the front of the 210D holds your
injection and priming syringes, spare parts, and a few vials securely
during shipping. No longer will you have to worry about your syringe
rolling off the bench onto the floor! Keep your HPLC tools with your
HPLC. |
 |
|
|
| The SRI
Model 210D HPLC System includes: |
| Single
channel PeakSimple data system |
| Stainless
steel pump head(s): |
Flow
from 0.1 to 5mL/minute
Piston flush for longer seal life
6000psi rating
|
| Rheodyne
injection valve with remote start |
| Prime/purge
valve |
| Pulse damper |
| Pressure
gauge (0-6000psi) |
| Broadband
UV detector |
| Conductivity
detector |
| Column
heater (ambient to 100 degC) |
| Solvent
recycle valve |
| Helium
degas |
|
All
for $6,495...Compare to $12,000 elsewhere
|
|
Upgrade
and get a Binary Gradient system for under $10,000
|
|
|
|
| |
Gradient
Upgrade
Unlike
other HPLC systems, the SRI Model 210D gradient upgrade can be performed
by the user, in the field, in about an hour. All the necessary wiring
is already included with the base isocratic system. All the upgrade
requires are just a few screws and plumbing connections to add the
second pump head and circuit board.
|
| |
|
|
| The
210D is completely field portable. The entire HPLC can run off the
12 volt power from the cigarette lighter in your vehicle. Whether
you are performing analyses in the jungle, desert, or city, the 210D
can go with you. It can be transported around the world in the rugged
re-usable shipping container, which is small enough to travel as airline
baggage. |
|
|
|
The
Model 210D is designed for easy one-person transport in the field.
|
|
|
0210D-1000
|
Model
210D Isocratic HPLC system with a single channel serial PeakSimple
data system |
USD
6,495.00
|
|
0210D-0300
|
Upgrade
to Binary Gradient |
$
3,495.00
|
|
0210D-1300
|
Binary
Gradient HPLC system with single channel serial PeakSimple data system |
$
9,990.00
|
|
0210D-4000
|
Model
210D Isocratic HPLC system with four channel serial PeakSimple data
system |
$
7,495.00
|
|
0210D-6000
|
Model
210D Isocratic HPLC system with six channel USB PeakSimple data system |
$
7,695.00
|
|
| Model
210D HPLC System |
SRI-03_78-81
|
|
|
|