Omnifit large variable bore 'cap-type' connectors |
- for 0.5 to 11mm OD tubing
-
Leak-free, reliable connections
- Chemically inert all PTFE body
50psi pressure rating The Omnifit range of 'Cap-type' connectors is a versatile system for connecting different types of hardwall tubing such as PTFE, instantly.
They can be used for sampling,
flow-splitting, mixing and fluid line interconnection.
Tubing sizes between 0.5 and 11mm OD can be connected using either Viton seals or PTFE cones.
Large bore to large bore connector
These are supplied with Viton® seals in both ends of the connector which allow instant connection of tubing sizes from 4mm to 11mm OD and make a compression-type fitting. The connector has a nominal 4.7mm bore size.
Large to small bore reducing connectors
The large bore end has a
Viton® seal suitable for 4 to 11mm OD tubing sizes and the small bore end is supplied with one large and 2 small Viton® O-rings for immediate connection of 0.5 to 4mm OD tubing sizes.
PTFE cone option
A range of PTFE cones to accept Imperial tubing sizes from 5/32'' to 7/16'' and metric tubing sizes from 4mm to 11mm OD are available separately. PTFE cones also make a compression-type fitting, but ensure an all-PTFE flow path.
<1/4"-28 UNF fitting
The coloured or Tefzel® caps at the small bore end of the connector have an internal thread that accepts 1/4''-28 UNF fittings, such as the Omnifit inverted cone or Gripper fitting. |
Omnifit Small variable bore 'cap-type' connectors for 0.5 to 4mm OD tube
|
- Leak-free reliable connections
- Chemically inert all PTFE body
The Omnifit range of 'Cap-type' connectors is a versatile system for connecting different types of hardwall tubing such as PTFE, instantly. They can be used for sampling, flow-splitting, mixing and fluid line interconnection. Tubing sizes between 0.5 and 4mm OD can be connected using either Viton O-rings or PTFE cones.
O-ring option
One large and two small Viton® O-rings are suppled as standard with every connector. These allow instant connection of tubing sizes from 1mm to 4mm OD and make a compression-type fitting.
PTFE cone option
PTFE cones are supplied as standard with every connector: 1/16'' (1.6mm) with standard bore connectors and 1/32'' (0.8mm) with small bore connectors.
A range of PTFE cones to accept other tubing sizes from 0.5mm to 4mm OD tubing are also
available separately.
PTFE cones also make a compression-type fitting, but ensure an all-PTFE flow path.
Standard bore connectors
Standard bore connectors are supplied with Viton O-rings, 1/16'' PTFE cones and coloured polypropylene caps. They have a 1.5mm bore size and accept tubing sizes between 0.5 and 4mm OD.
Small bore connectors
Small bore connectors are supplied with Viton® O-rings, 1/32'' (0.8mm) cone and natural Tefzel® caps. They
have a bore size of 0.8mm and can accept tubing sizes between 0.5 and 4mm OD.
The coloured or Tefzel® caps have an internal thread that accepts 1/4''-28 UNF fittings, such as the Omnfiit inverted cone or Gripper fitting.
The PTFE cone supplied with the connector provides the flat bottom for the 1/4'' -28 UNF fitting to give a leak-free, self-centering connection.
|
In-line connectors Female in-line connectors for use with Omnifit Grippers - Pressure rated to 1000psi (69bar)
-
For use with Omnifit Grippers
In-line connectors are ideal for applications where space is limited. Two versions of the Omnifit in-line connector are available, accepting either 1/16'' or 1/8'' OD hard wall tubing. The fitting then simply connects onto any male 1/4''-28 UNF thread port. |
1/4''-28 UNF block connectors
Bulkhead mountable block connectors in PEEK or Acetal
- Accepts male 1/4''-28 UNF fittings
'T' and 'X' block connectors
3 or 4-way connectors with a bore size of 1.5mm.
Blocks are constructed from PEEK and are bulkhead mountable.
Straight through
block connectors
Two versions are available offering straight-through connection of two pieces of tubing in either a 2 line or 8 line configuration.
Blocks are constructed from Acetal and are bulkhead mountable.
Used with Omnifit Gripper fittings, these connectors give an all PTFE fluid path with zero dead volume. |
